实拍ZENNER水表DE-08-MI001-PTB017/Q3=2.5

实拍ZENNER水表DE-08-MI001-PTB017/Q3=2.5

ZENNER
Displacement Type Magnetic Drive
Cold Water Meters
Model PPD
Sizes: 5/8", 3/4”, 1”, 1-1/2”, 2”
U.S.A. Patent US D472,835 S
INTRODUCTION: ZENNER PPD Water Meters utilize a magnetically driven, positive displacement, oscillating piston design. It is designed to measure clean potable water where flow is in one direction only in residential, commercial and industrial settings.
OPERATION: Water flows through the meter’s strainer and into the measuring chamber where it drives the piston. The hydro dynamically balanced piston oscillates around a control roller, guided by a division plate. A drive magnet transmits the motion of the piston to a driven
magnet located within the hermetically sealed register. The magnet is connected to a gear train which trans-lates the piston oscillations into volume totalization displayed on the register dial face.
CONSTRUCTION: ZENNER PPD Water Meters consist of three basic components: main case, measuring cham-ber and a sealed register. The main cases are constructed using C89833 Brass Alloy. Measuring Chambers are constructed of a durable synthetic polymer. Bottom plates (for meter sizes 5/8” thru 1”) are available in Bronze,
Cast Iron or synthetic polymer.  Registers are available as either direct read or electronic output.
MAINTENANCE: ZENNER PPD Water Meters are engineered and manufactured to provide long-term service and operate virtually maintenance free. The precise simple design allows for part interchangeability which re-duces parts inventory. The register housing may be removed without affecting water pressure or removal of the main case.
REGISTRATION: ZENNER PPD Water Meters utilize a magnetically driven, hermetically sealed design. The sealed design eliminates dirt, moisture infiltration, and prevents fogging. The register includes a large odome-ter-type totalization display, center sweep hand (360°) test circle and low flow leak detection. All ZENNER
Meters have electronic output capabilities for easy conversion to Automated Meter Reading. 5/8” through 1” capacities are: 10,000,000 Gallons, 1,000,000 Cubic Feet, 100,000 Cubic Meters, 6 odometer wheels. 1 1/2” and 2” registration capacities are: 100,000,000 Gallons, 10,000,000 Cubic Feet, 1,000,000 Cubic Meters, 6 odometer wheels.
CONFORMANCE: ZENNER PPD Water Meters are tested and comply with AWWA C700 and ISO 4064 perfor-mance standards. These Meters comply with the lead-free provisions of the Safe Drinking Water Act and are certified to NSF/ANSI Standards 61 and 372.
TAMPERPROOF FEATURES: Customer removal of the register to obtain free water is prevented through the use of a locking device that requires a special tool, only available to water utilities.
CONNECTIONS: These meters have been designed with ease of installation in mind through the use of built-in wrench pads on meter sizes 5/8” through 1”. Tailpiece/Unions for installations of meters are available as an option for various pipe types, sizes and misaligned pipes. The 1-1/2” PPD09 and 2” PPD12 flanged meters are available with an optional 1” test port.

位移型磁驱动
冷水米
产后抑郁症模型
尺寸:5/8”,3/4”,1”,1 - 1/2“,2”
美国我们D472,835年代
作品简介:禅宗产后抑郁症水表利用磁驱动,容积式,往复式活塞设计。它目的是测量干净饮用水,流在一个方向上只有在住宅,商业和工业设置。
操作:水流通过计的过滤器和测量室驱动活塞。动态水力平衡活塞周围振荡控制辊,由隔板。驱动磁铁传输驱动活塞的运动
磁铁位于密封的登记。磁铁被连接到一个轮系trans-lates活塞振动成卷整体化显示在注册钟面。
建设:禅宗产后抑郁症水表由三个基本部分组成:主要情况下,测量cham-ber和一个密封的登记。主要的情况下,基于“增大化现实”技术
zenner的单喷米和米从zenner的胶囊和配件米计划是额外的干表盘米。从湿室到计数器的传输通过磁耦合。因此，只有涡轮工作在潮湿的房间里。计数器辊与水没有接触。故障如柜台堵塞由于水污染是可以避免的，这显示了优良的测量结果和长期测量的稳定性。
仅是在水表和热量表。Zenner还利用Zenner的人才开发新产品，保证更的测量结果和一个更简单，更具成本效益和更有效的测量数据读出。这包括，例如，用于远程水表查询的无线电系统。
enner为客户提供完整的产品组合，水表。采用模块化结构，可扩展相应的配件和的系统技术，在应用的各个领域，zenner的产品是*选择。
国内对住房和公寓、技术测量、工业或市政供水每一客户群将在真兰找到一个合适的产品。与zenner的客户和合作伙伴正在进行的对话使zenner在广泛的客户群体和细分市场的持续产品创新成为可能。zenner的创新人才不仅是在水表和热量表。zenner还利用zenner的人才开发新产品，保证更的测量结果和一个更简单，更具成本效益和更有效的测量数据读出。这包括，例如，用于远程水表查询的无线电系统。
在住宅和公寓部门，真zenner提供大量水表。zenner提供两种不同的仪表类型的住宅行业：单喷气米和胶囊米。这些通常用于公寓建筑的耗水的子分布。不同的配件可用于胶囊米。这些让水米简单追溯安装时没有集中计量的可能性是存在的。
在住宅和公寓部门，真Zenner提供大量水表。Zenner提供两种不同的仪表类型的住宅行业：单喷气米和胶囊米。这些通常用于公寓建筑的耗水的子分布。不同的配件可用于胶囊米。这些让水米简单追溯安装时没有集中计量的可能性是存在的。
Zenner的单喷米和米从Zenner的胶囊和配件米计划是额外的干表盘米。从湿室到计数器的传输通过磁耦合。因此，只有涡轮工作在潮湿的房间里。计数器辊与水没有接触。故障如柜台堵塞由于水污染是可以避免的，这显示了优良的测量结果和长期测量的稳定性。
Brevino                M14000002  24VDC
HYDAC                EDS308-5-050-017
HYDAC                HDA4744-A-400-000
HYDROPA            DS-307/SS-100/PO
NORGREN            863142
JUMO                  60851-2160-840-02-4000-872-6-103-95
JUMO                   ATH22
STEUTE                 1047013
EPCOS                  BR6000-R12
AVENTICS            
AVENTICS             0820056502
ZENNER                DE-08-MI001-PTB017/Q3=2.5
BUCHER                WEDL-42-A-6-V-1   24VDC
POWER-HYDRAULIK     H30760S  SN:38286
OMAL                   DA120401S
MEGGER               MIT515
MEGGER               MIT410/2
BURKERT              132161
FRISTAM              9.665(2V21E/2N5E)
Poseico                AT737LTS10
CEMP                  ATN200/cemp  AB30 71 B2/SN 1214885002